86-577-27860068
Where you are currently:Home > Products
FJ6/JST2 series terminal block

一 、General
FJ6/JTS2 series terminal block is designed for wiring in electric control distribution equipment,complete equipment and terminal appamtus,etc..The productis of ratedinsulation voltage690V,ratedworking voltage 380V,maxsectionofinletterminal conductor 120mm 2.Accordingto different circuit number and connection ways.the section of outlet terminal reaches 2.5-1 20mm 2.This product structure has advantages of original structure,firm connection and flexible operation.In addition,it can also serve as electric equipment busbar,heavy—currentterminal block,neutral terminal,grounding terminal,equipotential terminal,etc..
 
二、Features
FJ6/JTS2 seriesterminal blockis composed ofconductive part,insulatorfoot and protective cover,with compactvolumeand reliablestructu re.Through its inletterminal.the conductorcan be connecteddirectly(simpleconnection) orconnectedwithOTlug(panelconnection),in addition,this inlet terminal also allows the copper busba r not exceeding 30MM to enter,and alI connections attheoutletterminal are0fthe ba rrel type.The bottom of crimping screw is spherical shape,which takes no damage overthe conductorwhen crimping,and evenbrings big enough extrusion force over the conductor and have more reliable contact.
 
三、 Installation & Use
There are two ways to install this product:
1. Drill a hole in the bottom plate directly and install (only for the product whose outline size is 78 x 63 x 36,   and mounting screw is M5);  
2. Install it on TH-35 rail (top-hat rail).  It is suggested that multi-core wire should  be used for connecting conductors. And only the conductor is inserted into the bottom of blind hole thoroughly, could the screw  be tightened down to prevent wrong connection. When conductor section is small, and conductor insulator can be stuffed into the connection hole,the insulator is allowed to enter into the connection hole on the premise of reliable contact of conductor. If the protective cover is required to open, pinch the lap of protective cover inwa rd slightly, insert a screwdriver into the lap, then rotate it slig htly. When to assemble the protective cover, apply the pressure to four laps, and make sure every lap into the hole.
 
四、Notification of order
When ordering, please indicate the model (or order No.) and quantity.
The inlet and outlet wire size of FJ6/JTS2 series terminal block can be customized
 
五、 Mounting Dimension

Copyright © 2018 Wenzhou Jiangguang Electric Technology Co., Ltd. All rights reserved

Tel:0086-577-27860068    Fax: 0086-577-27881076